Крупнейшая в мире платформа для поставок недостающих и труднодоступных деталей

Principle and Standard Specification of Thermal Shock for Electronic Products

Опубликованное время: 2024-01-18 15:46:58
Thermal shock testing, also known as temperature shock, thermal shock resistance, etc., simulates the sample in the temperature drastic changes or alternating high and low temperature changes in the environment of the test.

In the course of use, electronic products often encounter temperature changes, such as high temperature, low temperature and rapid transition of temperature changes. These temperature changes may have an impact on the performance and reliability of electronic products, so it is necessary to carry out cold and thermal shock testing of electronic products. In this paper, we will introduce the principle of cold and thermal shock of electronic products and standard specifications.

 

Ⅰ. the principle of thermal shock

Thermal shock testing is a simulation of electronic products in the temperature change under the use of environmental testing methods. In the test, the electronic products will be placed in the high temperature and low temperature environment, or in the high temperature and low temperature between the rapid conversion, in order to simulate the temperature changes in the actual use of electronic products. Through testing, the performance and reliability of electronic products at different temperatures can be understood to provide reference for product design and manufacturing.

The principle of thermal shock testing is to utilize the physical principle of thermal expansion and contraction. When an electronic product is in a high-temperature environment, the material will expand, while in a low-temperature environment, the material will contract. This change in thermal expansion and contraction may lead to structural deformation, material fatigue, loose soldering and other problems in electronic products. Through the thermal shock testing, the performance and reliability of electronic products under temperature change can be detected, so as to improve the quality and reliability of the products.

 

Ⅱ. the standard specification

In order to ensure the accuracy and comparability of the thermal shock testing, the international development of a series of standard specifications. The following are common standard specifications for thermal shock testing:

 

1. MIL-STD-810

MIL-STD-810 is a test standard developed by the U.S. Department of Defense to test the performance and reliability of military equipment in various environments. The standard includes a variety of test methods, including those for temperature changes, such as thermal shock testing and cold shock testing.

 

2. IEC 60068

IEC 60068 is a test standard developed by the International Electrotechnical Commission (IEC) to test the performance and reliability of electronic products under various environmental conditions. The standard includes a variety of test methods which include temperature change test methods such as thermal shock test and cold shock test.

 

3. JESD22-A104

JESD22-A104 is a test standard developed by the Electronic Industries Association of America to test the performance and reliability of electronic products under temperature changes. The standard includes methods and requirements for cold and thermal shock testing, such as test temperature range, test time, and number of tests.

 

4. GB/T 2423.22

GB/T 2423.22 is a test standard formulated by the Standardization Administration of China for testing the performance and reliability of electronic products under temperature change. The standard includes methods and requirements for cold and thermal shock testing, such as test temperature range, test time, and number of tests.

 

The above standards and specifications include the methods and requirements of cold and thermal shock testing, which can be used as a reference standard for cold and thermal shock testing of electronic products.

 

Ⅲ.Purpose

1. Product development stage: timely detection of PCB design defects and correction, so that the design defects stop at the R & D stage, shorten the R & D cycle and reduce costs.

 

2. Product production stage: test the quality of the product to meet customer requirements, found that the production process defects in a timely manner to investigate the reasons for improvement, to ensure the safety and quality of the products shipped.

 

3. Material and process certification: Evaluate whether the substrate, ink, PP, process, etc. used meets the reliability of the product.

 

4. Material and process research: Compare the cold and thermal shock resistance of products with different substrates, inks and processes, and screen good materials and processes.

 

Thermal shock testing is an important electronic product testing methods, can detect the performance and reliability of electronic products in the temperature change. In testing, standard specifications need to be followed to ensure the accuracy and comparability of the test. Through the thermal shock testing, the quality and reliability of electronic products can be improved to provide reference for product design and manufacturing.

If you like this article, click into perceptive-ic.com to see more.   

Другие продукты Горячие продажи

MECT-110-01-M-D-RA1
Pluggable Connectors
MECT-110-01-M-D-RA1
20 Position SFP+ Receptacle Connector Solder Surface Mount, Right Angle
GSH1MA16
Диоды - Выпрямители - Одинарный
GSH1MA16
GSH1MA16, Diode 1600 V 1A Surface Mount DO-214AC (SMA), DC: 24+
FT10302N0050JBK
RF Misc ИС и модули
FT10302N0050JBK
FT10302N0050JBK, RES THIN FILM DC: 24+
HE2W107M22030HA
Aluminum Electrolytic Capacitors
HE2W107M22030HA
HE2W107M22030HA Samwha Aluminum Electrolytic Capacitors
TSHA4401
LED Emitters - Infrared, UV, Visible
TSHA4401
TSHA4401 Vishay Semiconductor Opto Division
MAX7456EUI-T
Аудио специального назначения
MAX7456EUI-T
MAX7456EUI+T Manufacturer Analog Devices Inc./Maxim Integrated Video IC Serial, SPI NTSC, PAL 28-TSSOP-EP Package
APTGF75H120TG
Транзисторы - IGBT - Модули
APTGF75H120TG
APTGF75H120TG Manufacturers Microchip Technology IGBT Modules Power Module - IGBT
R-785-0-0-5
DC-DC Converter
R-785-0-0-5
R-785.0-0.5 Manufacturer Recom Power Linear Regulator Replacement DC DC Converter 1 Output 5V 500mA 6.5V - 32V Input
R570452000
Coaxial Switches
R570452000
R570452000 Coaxial Switches SPDT Ramses SMA 18GHz Latching Self-cut-off 12Vdc Diodes Pins Terminals
NTCALUG01T103G400A
Датчики температуры - Термостаты - Твердотельные
NTCALUG01T103G400A
NTCALUG01T103G400A Temperature Sensors - Thermostats NTC LUG01T 10K 2% 3984K G26 40MM
Популярный комментарий

Рекомендуемые детали